曲靖附近想过夜电话联系

Welcome to the official website of Shandong jiexima Machinery Technology Co., Ltd!
24-Hour Hour Hotline
eighteen billion seven hundred and sixty-five million seven hundred and ninety-eight thousand and ninety-seven
 Food machinery manufacturers
Contact jessima machinery
National hotline:
0536-6568788

Fixed line: 0536-6568788

Mobile phone: 18765798097

Fax: 0536-6568788

Email: 18765798097

Address: No.79 Shungeng Road, Zhucheng City, Weifang City, Shandong Province

Three kinds of safety precautions for sandwich pot [2020-09-02]
From the point of heating mode, according to the heating mode, the sandwich pot is different in thickness and material. It can be divided into steam, electric and gas heating. 1. Steam sandwich pot: the steam generated by the boiler is used to heat the sandwich pot. This type of heating is called steam sandwich pot. Generally, this heating method is used
Influencing factors of sterilizer electric dual purpose sterilizer system [2020-08-31]
High temperature hot water circulation is the most widely used sterilization machine among several ways in the sterilization pot. It is mainly used to culture and ferment various kinds of bacteria. In order to prevent the bacteria from being polluted, the sealing requirements are high. There is a stirring slurry in the tank, which is used for continuous stirring during the fermentation process. The sparger with ventilation at the bottom is also known as the air distributor, which is used to pass the bacteria
How to use the sterilization pot [2020-08-28]
What are the key points in the operation and use of the sandwich pot. 1. Before feeding, a small amount of water should be injected into the pot, the bottom ball valve should be opened, and then the steam inlet valve should be opened. When the cold air in the interlayer of the boiler is exhausted, close the ball valve. When the pointer of the pressure gauge rises to the specified working pressure of the equipment, set the safety valve to make it reach the pressure relief value specified by the equipment, and then the steam will be released automatically
How to use the sandwich pot [2020-08-26]
How to ensure the safety of personnel using the sandwich pot. (1) Except for the personnel who have received education and training on the residual hazards of the equipment and avoiding those risks, other personnel are requested to stay away from the machine. (2) Please carry out the mechanical transformation entrusted by our company. Modification, operation steps and operation mode that may damage the operator or mechanical safety may cause injury
Pay attention to trouble shooting in operation of steam sandwich boiler [2020-08-24]
Attention should be paid to the operation of steam heating sandwich pot. 1. Before feeding, a small amount of water should be injected into the sandwich pot, the bottom ball valve should be opened, and then the air inlet valve should be opened. After the cold air in the interlayer of the boiler is exhausted, close the ball valve. When the pressure gauge pointer rises to the working pressure set by the sandwich pot, set the safety valve to make it reach the pressure relief specified in the equipment
Operating procedures of steam jacketed boiler [2020-08-21]
Operating procedures for steam jacketed boiler. Because the compressed air is a bad heat conduction body, and the steam itself has a certain pressure, so in the process of sterilization and temperature rise, do not put compressed air into it, but only need to be in the heat preservation state after reaching the sterilization temperature. After the completion of sterilization and cooling, stop the steam supply and put the cooling water pressure into the spray pipe. Because the pot
Features of electric dual purpose sterilizer installed in sandwich pot [2020-08-19]
The sandwich pot is composed of pot body and legs, which is used in the processing of various kinds of food, and can also be used in large restaurants or canteens to cook soup, cook vegetables, stew meat, porridge, etc. it is a good equipment for food processing to improve the quality, shorten the time and improve the working conditions. 1. Tighten the two set screws of the bracket. When the pan is rotated, the inlet and outlet pipes at both ends are not allowed to rotate with the pot
Safe operation of horizontal sterilizer [2020-08-17]
Horizontal sterilizer is a kind of cylinder sterilization equipment with compressed air as pressure. The locking type of pot cover is self-locking wedge engagement method, which is easy to open and close. It is suitable for sterilization of tin cans and glass cans by cans and drinks. 1. Operation process index, maximum working pressure and maximum working temperature of sterilization pot. 2. Operator of sterilization pot
Selection principle of sterilization pot [2020-08-14]
The sterilizer takes steam with certain pressure as heat source, which has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material, and easy control of heating temperature. 1. It is mainly selected from the temperature control accuracy and heat distribution uniformity. If the product is required to have strict temperature, especially for export products, because the heat distribution is required to be uniform, it is necessary to try our best
Energy saving measures of sterilization pot [2020-08-12]
In order to realize water saving and energy saving, we divide the water tank of sterilizer into two parts. The front part is the small capacity water tank in the temperature zone, and the water tank in the temperature zone is made as small as possible, so that the temperature rise and temperature decrease quickly, and the water saving and energy saving are realized. The rear part is the buffer tank with large capacity, which is divided into several buffer zones according to the operation curve and temperature. When the water tank in the temperature zone is full, it will automatically overflow to the buffer tank for storage
Do a good job in the post work of sterilization pot in food industry [2020-08-10]
How to do a good job in the later stage of sterilization pot after customers purchase. In addition to its own performance, the sandwich pot is classified clearly, which is also the advantage. According to the structure, it can be divided into: tilting type sandwich pot, vertical (fixed) sandwich pot structure. According to the heating mode, it can be divided into: electric heating sandwich pot, steam heating sandwich pot, combustion
Application of sandwich pot selection principle of small sterilizer [2020-08-08]
What are the applications of sandwich pot in work. 1. The steam pressure shall not exceed the rated working pressure for a long time. 2. When entering steam, slowly open the steam inlet valve until the pressure is required. If the stop valve at the condensate outlet is equipped with a steam trap, the valve should always be opened. 3. If there is no steam trap, open the valve until the steam overflows